Refine
Document Type
- Article (8)
- Conference Proceeding (4)
Language
- English (12) (remove)
Keywords
- Polymer-Elektrolytmembran-Brennstoffzelle (2)
- hydraulic compression (2)
- modular stack design (2)
- water electrolysis (2)
- Electrolysis (1)
- Homogene Kühlung (1)
- Hydraulic cell compression (1)
- Membrane (1)
- PEM Electrolysis, Hydrogen, Hydraulic Compression, High Pressure (1)
- PEM electrolysis (1)
- PEM fuel cell (1)
- PEMWE (1)
- Porous Transport Layers (1)
- Stack <Brennstoffzelle> (1)
- Upscaling laboratory models (1)
- bipolar plate (1)
- coatings (1)
- corrosion resistance (1)
- hydraulic cell compression (1)
- novel (1)
- polymer electrolyte membrane (1)
This report gives a brief overview to the state of the art of PEM fuel cell technology and a description of a newly developed fuel cell stack concept. One main research activity at the Westphalian Energy Institute of the Westphalian University of Applied Sciences is the development of PEM fuel cells, for which a range of different materials have been investigated for fuel cell pole plate construction. Whereas graphite is a material which has suitable properties concerning conductivity as well as manufacturing e.g. for milling, stainless steel foils are suitable for economical hydroforming processes. However, with steel coating is necessary to increase corrosion resistance as well as electrical conductivity. A new fuel cell stack design is currently under development using separated single fuel cells with hydraulic cell compression. The advantages of this stack concept are modularity, effective heat exchanging and constant, uniform cell compression which are further described in this work.
In this experimental work we present a novel electrolyzer system for the production of hydrogen and oxygen at high pressure levels without an additional mechanical compressor. Due to its control strategies, the operation conditions for this electrolyzer can be kept optimal for each load situation of the system. Furthermore, the novel system design allows for dynamic long-term operation as well as for easy maintainability. Therefore, the device meets the requirements for prospective power-to-gas applications, especially, in order to store excess energy from renewable sources. A laboratory scale device has been developed and high-pressure operation was validated. We also studied the long-term stability of the system by applying dynamic load cycles with load changes every 30 sec. After 80 h of operation the used membrane electrode assembly (MEA) was investigated by means of SEM, EDX and XRD analysis.
The technology of polymer electrolyte membrane (PEM) electrolysis provides an efficient way to produce hydrogen. In combination with renewable energy sources, it promises to be one of the key factors towards a carbon-free energy infrastructure in the future. Today, PEM electrolyzers with a power consumption higher than 1 MW and a gas output pressure of 30 bar (or even higher) are already commercially available. Nevertheless, fundamental research and development for an improved efficiency is far from being finally accomplished, and mostly takes place on a laboratory scale. Upscaling the laboratory prototypes to an industrial size usually cannot be achieved without facing further problems and/or losing efficiency. With our novel system design based on hydraulic cell compression, a lot of the commonly occurring problems like inhomogeneous temperature and current distribution can be avoided. In this study we present first results of an upscaling by a factor of 30 in active cell area.
In this study, a novel design concept for PEMFC (polymer electrolytemembrane fuel cell) stacks is presented with singlecells inserted in pockets surrounded by a hydraulic medium. Thehydraulic pressure introduces necessary compression forces to themembrane electrode assembly of each cell within a stack. Moreover, homogeneous cell cooling is achieved by this medium. First,prototypes presented in this work indicate that, upscaling of cells for the novelstack design is possible without significantperformancelosses. Due to its modularity and scalability, this stackdesign meets the requirements for large PEMFC units.
An energy economy with high share of renewable but volatile energy sources is dependent on storage strategies in order to ensure sufficient energy delivery in periods of e.g. low wind and/or low solar radiation. Hydrogen as environmental friendly energy carrier is thought to be an appropriate solution for large scale energy storage. In 2011 the NOW (national organisation for hydrogen in Germany) calculated the demand for hydrogen energy systems as positive (0.8 GW to 5.25 GW) and negative supply for varying power demand (0.68 to 4.3 GW) for the German energy economy in 2025. Due to its dynamic behaviour on load changes polymer electrolyte membrane fuel cells (PEMFC) as well as water electrolyser systems (PEMEL) can play a significant role for large scale hydrogen based storage systems. In this work a novel design concept for modular fuel cell and electrolyser stacks is presented with single cells in pockets surrounded by a hydraulic medium. This hydraulic medium introduces necessary compression forces on the membrane electrode assembly (MEA) of each cell within a stack. Furthermore, ideal stack cooling is achieved by this medium. Due to its modularity and scalability the modular stack design with hydraulic compression meets the requirements for large PEMFC as well as PEMEL units. Small scale prototypes presented in this work illustrate the potential of this design concept.
A compact and efficient PEM electrolyser stack design based on hydraulic single cell compression
(2019)
Performance enhancing study for large scale PEM electrolyzer cells based on hydraulic compression
(2017)
For proton exchange membrane water electrolysis (PEMWE) to become competitive, the cost of stack components, such as bipolar plates (BPP), needs to be reduced. This can be achieved by using coated low-cost materials, such as copper as alternative to titanium. Herein we report on highly corrosion-resistant copper BPP coated with niobium. All investigated samples showed excellent corrosion resistance properties, with corrosion currents lower than 0.1 µA cm−2 in a simulated PEM electrolyzer environment at two different pH values. The physico-chemical properties of the Nb coatings are thoroughly characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). A 30 µm thick Nb coating fully protects the Cu against corrosion due to the formation of a passive oxide layer on its surface, predominantly composed of Nb2O5. The thickness of the passive oxide layer determined by both EIS and XPS is in the range of 10 nm. The results reported here demonstrate the effectiveness of Nb for protecting Cu against corrosion, opening the possibility to use it for the manufacturing of BPP for PEMWE. The latter was confirmed by its successful implementation in a single cell PEMWE based on hydraulic compression technology.
