Adhesive organs enable insects to reversibly adhere to substrates even during rapid locomotion. In this process a very fast but reliable change of adhesion and detachment is realised. The stick insect Carausius morosus detaches its adhesive organs by peeling them off the substrate, meaning little areas of the adhesive organs are detached one after another. For such a detachment mechanism low pulling forces are needed. A detachment mechanism as peeling seems also for artificial adhesion devices to be the easiest and the most effortless mechanism for detachment. However, artificial adhesion devices mostly exhibit a solid backing layer preventing effortless peeling. To lift up and detach a small area at the corner of an adhesion device the backing layer has to be tilted, resulting in a deformation of the whole adhesion device, which requires high forces. Subdividing the backing layer into small subunits allows a detachment of a small area at the corner of the adhesion device without deforming the rest of the adhesion device. Thereby, less force is needed to initiate and to complete detachment. To realise an easy detachment of artificial adhesion devices we constructed a holder, which gradually detaches an adhesion device from two sides off the substrate. During normal loading the subunits of the holder interlock with each other so that the pulling force is equally distributed over the whole contact area of the adhesion device ensuring maximal adhesion force. In addition, the holder can be used to increase adhesion during application of the adhesion device. When brought into contact with the substrate with lifted sides, which are lowered subsequently, air trapping is prevented and hence the area of contact can be maximised.
Adhesive organs like arolia of insects allow these animals to climb on different substrates by creating high adhesion forces. According to the Dahlquist criterion, arolia must be very soft exhibiting an effective Young's modulus of below 100 kPa to adhere well to different substrates. In previous studies the effective Young´s moduli of adhesive organs were determined using indentation tests yielding their structure to be very soft indeed. However, arolia show a layered structure, thus the values measured by indentation tests comprise the effective Young´s moduli of the whole organs. In this study, a new approach is illustrated to measure the Young´s modulus of the outermost layer of the arolium, i.e. of the epicuticle, of the stick insect Carausius morosus by tensile testing. Due to the inner fibrous structure of the arolium tensile tests allow the characterisation of the overlying epicuticle.