Maschinenbau und Facilities Management
Filtern
Dokumenttyp
Sprache
- Deutsch (7)
- Englisch (3)
- Mehrsprachig (2)
Schlagworte
- Arbeitskräftemangel (1)
- BIM (1)
- Cavitation; Corrosion; Laser remelting; Self-fluxing alloys; Stellite 6 (1)
- Gesellschaft Technische Gebäudeausrüstung (1)
- IFC (1)
- Indien (1)
- Internationale Kooperation (1)
- Mathematische Ausdrücke (1)
- Sprachunterricht (1)
- Stellite 6; HVOF-spraying; Laser remelting; Cavitation erosion; Coatings (1)
Based on the fact that titanium and titanium alloys have poor fretting fatigue resistance and poor tribological properties, it is necessary to apply some surface engineering methods in order to increase the exploitation characteristics of these materials. One may either implement some surface treatment technologies or even deposit overlay coatings by thermal spraying.
The present study is focused on the achieved properties of the ceramic coatings (Al2O3 + 13 wt.% TiO2) deposited onto a titanium substrate using high velocity oxygen fuel (HVOF) and plasma spraying (APS) respectively.
The effect of the deposition method on the microstructure, phase constituents, and mechanical properties of the ceramic coatings was investigated by means of scanning electron microscopy (SEM), X-ray diffraction technique (XRD) and nanoindentation tests. The sliding wear performances of the Al2O3–TiO2 coatings were tested using a pin on disk wear tester.
TGA-Modelle in BIM-Projekten
(2020)
Die BIM-Methode erfasst in Deutschland mittlerweile alle Gewerke im Bauhauptgewerbe. Für die TGA-Branche hat sich gezeigt, dass die Priorität der Produkthersteller auf der Bereitstellung der Geometriedaten liegt. Weiterführende Metadaten und Attribute (z. B. Material, Masse, Preise, Leistungsdaten) sind oftmals nur in reduzierter Form oder gar nicht vorhanden. An exemplarischen Beispielen von RLT-Reräten und Komponenten werden die geometrischen und semantischen Möglichkeiten beim IFC-Format untersucht.
Welding and joining of components processed by additive manufacturing (AM) to other AMas well as conventionally produced components is of high importance for industry as thisallows to combine advantages of either technique and to produce large-scale structures,respectively. One of the key influencing factors with respect to weldability and mechanicalproperties of AM components was found to be the inherent microstructural anisotropy ofthese components. In present work, the precipitation-hardenable AleSi10Mg was fabri-cated in different build orientations using selective laser melting (SLM) and subsequentlyjoined by friction stir welding (FSW) in different combinations. Microstructural analysisshowed considerable grain refinement in the friction stir zone, however, pronouncedsoftening occurred in this area. The latter can be mainly attributed to changes in themorphology and size of Si particles. Upon combination of different build orientations aremarkable influence on the tensile strength of FSW joints was seen. Cyclic deformationresponses of SLM and FSW samples were examined in depth. Fatigue properties of thisalloy in the low-cycle fatigue (LCF) regime imply that SLM samples with the building di-rection parallel to the loading direction show superior performance under cyclic loading ascompared to the other conditions and the FSW joints. From results presented solid process-microstructure-property relationships are drawn.
Koordinatenmessungen - so genau wie nötig. Serienteile mit optimalen Messstrategien effizient messen
This collection of mathematical expressions and how they are read aloud in German and English is intended to help engineers and engineering students.