Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (24)
- Wissenschaftlicher Artikel (14)
- Teil eines Buches (Kapitel) (3)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Polymer-Elektrolytmembran-Brennstoffzelle (3)
- hydraulic compression (2)
- modular stack design (2)
- Elektrolyseure (1)
- Erneuerbare Energien (1)
- Homogene Kühlung (1)
- Hydraulic cell compression (1)
- Hydraulic compression, Carbon Nano Fibers, PEM Fuel Cells, Catalyst utilization (1)
- Hydrogen evolution reaction (1)
- Kohlenstoff-Nanoröhre (1)
- Membran-Elektroden-Einheit (1)
- PEM Electrolysis, Hydrogen, Hydraulic Compression, High Pressure (1)
- PEM electrolysis (1)
- PEM fuel cell (1)
- PEM fuel cell electrocatalysts, Carbon nanofibers, Oxygen plasma activation, Pulsed electroplating. (1)
- PEM fuel cells; electrode preparation; carbon nanofibers; in-situ performance test (1)
- PEM water electrolysis (1)
- PtCoMn (1)
- Stack <Brennstoffzelle> (1)
- Ternary alloy catalyst preparation (1)
- Testsystem (1)
- Upscaling laboratory models (1)
- Wasserstoffenergietechnik (1)
Institut
An energy economy with high share of renewable but volatile energy sources is dependent on storage strategies in order to ensure sufficient energy delivery in periods of e.g. low wind and/or low solar radiation. Hydrogen as environmental friendly energy carrier is thought to be an appropriate solution for large scale energy storage. In 2011 the NOW (national organisation for hydrogen in Germany) calculated the demand for hydrogen energy systems as positive (0.8 GW to 5.25 GW) and negative supply for varying power demand (0.68 to 4.3 GW) for the German energy economy in 2025. Due to its dynamic behaviour on load changes polymer electrolyte membrane fuel cells (PEMFC) as well as water electrolyser systems (PEMEL) can play a significant role for large scale hydrogen based storage systems. In this work a novel design concept for modular fuel cell and electrolyser stacks is presented with single cells in pockets surrounded by a hydraulic medium. This hydraulic medium introduces necessary compression forces on the membrane electrode assembly (MEA) of each cell within a stack. Furthermore, ideal stack cooling is achieved by this medium. Due to its modularity and scalability the modular stack design with hydraulic compression meets the requirements for large PEMFC as well as PEMEL units. Small scale prototypes presented in this work illustrate the potential of this design concept.
In the polymer electrolyte membrane fuel cells (PEMFC) state of the art, rare and expensive platinum group metals (PGM) or PGM alloys are used as catalyst material. Reduction of PGMs in PEMFC electrodes is strongly required to reach cost targets for this technology. An optimal catalyst utilization is achieved in case of nano-structured particles supported on carbon material with a large specific surface area. In this study, graphitic material, in form of carbon nanofibers (CNF), is decorated with Pt particles, serving as catalyst material for PEMFC electrodes with low Pt loading. As a novelty, the effect of oxygen plasma treatment of CNFs previously to platinum particle deposition has been studied. Electrodes are investigated in respect of the optimal morphology, microstructure as well as electrochemical properties. Therefore, samples are characterized by means of scanning electron microscopy combined with energy dispersive X-ray analysis, transmission electron microscopy, thermogravimetry, X-ray diffraction as well as X-ray fluorescence analysis. In order to determine the electrochemical active surface area of catalyst particles, cyclic voltammetry has been performed in 0.5 M sulphuric acid. Selected samples have been investigated in a PEMFC test bench according to their polarization behavior.
In this experimental work polymer electrolyte membrane fuel cell (PEMFC) electrodes are analysed, which are prepared by the use of two sorts of carbon nano fibres (CNF) serving as support material for platinum nano particles. Those CNFs, which are heat treated subsequently to their production, have a higher graphitisation degree than fibres as produced. The improved graphitisation degree leads to higher electrical conductivity, which is favourably for the use in PEMFC electrodes. Samples have been analysed, in order to determine graphitisation degree, electrical conductivity, as well as morphology and loading of the prepared electro catalyst. Membrane electrode assemblies manufactured from prepared electrodes are analysed in-situ in a PEM fuel cell test environment. It has been determined that power output for samples containing CNFs with higher graphitisation degree is increased by about 13.5%.
For this study gas diffusion electrodes (GDE) with low platinum loading are prepared for the application as anode in polymer electrolyte membrane fuel cell (PEMFC) systems based on hydraulic compression. As catalyst support material, carbon nanofibers (CNF) are investigated because of their high specific surface area and high graphitization degree. The electrode preparation is optimized by an economic and environmental friendly pre-treatment process in oxygen plasma. For GDE manufacture an ink containing oxygen plasma activated CNFs as well as hydrophilic polymer is used. After spray coating of this CNF ink on a graphitic substrate, platinum is deposited using the pulse plating technique. Preliminary results showed a considerable improvement of CNF dispersibility as well as an increased amount and an optimized morphology of the deposited platinum. Morphology and microstructure are observed by scanning electron microscopy as well as transmission electron microscopy. Platinum loading is determined by thermogravimetric analysis to be in the range of 0.01 mg cm-2 to 0.017 mg cm-2. Furthermore, MEAs are prepared from these GDEs and testing is performed in a novel modular fuel cell test stack based on hydraulic compression. Technical information about stack design and functions is given in this work.
Membrane electrode assemblies (MEA) developed at the Westphalian Energy Institute for polymer electrolyte membrane fuel cells (PEMFC) are high tech systems containing various materials structured in nanoscale, at which electrochemical reactions occur on catalyst nano particle surfaces. For low reactance homogeneous compression of the MEA’s layers is necessary. A novel stack architecture for electrochemical cells, especially PEMFC as well as PEM electrolysers, has been developed according to achieve ideal cell operation conditions. Single cells of such a stack are inserted into flexible slots that are surrounded by hydraulic media. While operation the hydraulic media is pressurised which leads to an even compression and cooling of the stack’s cells. With this stack design it has been possible to construct a test facility for simultaneous characterisation of several MEA samples. As compression and temperature conditions of every single sample are equal, with the novel test system the effect of e.g. different electrode configurations can be investigated. Furthermore, the modular stack design leads to the development of hybrid energy applications combining fuel cells, electrolysers, batteries as well as metal hydride tanks in one system.
Für einen Energiesektor, der zukünftig im hohen Maße auf erneuerbaren Quellen beruht, sind Energiespeicher unverzichtbar, um die heute gewohnte Versorgungssicherheit auch in Zeiten geringer Einspeisung aus Wasser, PV- und/oder Windkraftanlagen garantieren zu können. Da konventionelle Speichertechnologien wie beispielsweise Pumpspeicherkraftwerke durch fehlende mögliche Standorte in Deutschland nicht weiter ausgebaut werden, sind Alternativen notwendig. Es ist Konsens, hierfür emissionsarme Strategien zu entwickeln, um die gesetzten Ziele zur Reduktion von CO2 Emissionen zu erreichen. Neben Batterien, die vorzugsweise für Kurzzeitspeicher einzusetzen sind, bietet sich Wasserstoff als umweltfreundlicher Sekundärenergieträger an, der in großen Mengen gespeichert und in Brennstoffzellen mit hohem Wirkungsgrad emissionsfrei in elektrische Energie umgewandelt werden kann. Da elementarer Wasserstoff nicht natürlich vorkommt, ist dieser zuvor zu generieren. Überschüsse aus regenerativen Energiequellen können hierfür ideal genutzt werden. In diesem Beitrag wird ein aussichtsreiches Konzept für einen modularen Hochdruckelektrolyseur vorgestellt, welcher erlaubt, Wasserstoff bei einem hohen Ausgangsdruck bereitzustellen. Durch den prinzipiellen Aufbau, ist ein beliebiges Druckniveau am Ausgang nur von der mechanischen Stabilität der verwendeten Bauteile abhängig. Hierdurch ist es möglich, Wasserstoff direkt in einen Druckgasspeicher oder eine Pipeline zu produzieren, ohne einen zusätzlichen Verdichter nutzen zu müssen. Dies resultiert in signifikanten Kosteneinsparungen und verbessert den Systemwirkungsgrad zukünftiger Anlagen entscheidend.
This work deals with the preparation and investigation of polymer electrolyte membrane fuel cell (PEMFC) electrodes, which are obtained using gas diffusion layers coated with graphene related material (GRM) serving as a catalyst support for platinum nanoparticles. PEMFC electrocatalysts have been prepared by pulsed electrochemical deposition of platinum particles from hexachloroplatinic acid. Prior to GRM decoration with platinum, the graphene structures are functionalized by oxygen plasma treatment. This leads to oxygen containing functional groups on the GRM outer surface, providing an improved hydrophilic behavior, thus favoring the Pt deposition process. Membrane electrode assemblies (MEAs) with the so prepared electrodes are investigated in-situ in our fuel cell test system. Polarization plots (in-situ cell performance) using these MEAs have been tested under different operational conditions.